Loading
Home
Article
414

How do I ride off with the Automated Shift Assistant?

If you have a motorcycle equipped with Automated Shift Assistant (ASA)  you can set the ride-ready state as follows:
 

  1. Turn on the ignition. 
  2. Start the engine. 
  3. Raise the side stand. 
  4. Apply the brake. 
  5. Engage 1st gear with the foot gearshift lever. 

The motorcycle is now ready to ride. Manual shift mode "M" is active (default setting).
 

If you want to ride in manual shift mode "M" :

  1. Carefully open the throttle  to ride off. 
  2. Shift up and down as usual using the foot gearshift lever. The TFT display shows you which gear you are in.    
  3. To stop: Close the throttle  completely and brake to a standstill. 


Note:  If enginespeed falls below a gear-dependent minimum RPM,  the system automatically downshifts , even in manual mode.

If you want to ride off in automatic shift mode "D ", follow the steps below:

  1. Select shift mode "D" – by pressing the ASA button. 
  2. Carefully open the throttle to ride off. You can see from the icon on the TFT display, e.g., "D1", that you are in 1st gear in automatic shift mode.    
  3. To stop: Close the throttle completely and brake to a standstill. 
  4. Select the neutral position "N" by pressing and holding the foot gearshift lever all the way down OR by pressing and holding the ASA button. 

 

Note:  If you shift up or down manually using the foot gearshift lever, automatic gear selection is temporarily suspended.  As soon as a harmonious transition is possible, automated gear selection is resumed.

 

Link to watch video:  Automated Shift Assistant - Manual

 

Technology in detail
Was this article helpful?

Recommended articles

    2,424

    The Automated Shift Assistant (ASA) offers an innovative technical solution to make motorcycling easier and more comfortable, thus prioritizing the riding experience. Clutch con...
    1,800

    BMW Motorrad has developed use scenarios for the motorcycle that can be selected depending on which situation applies: RAIN: Riding on wet roads. ROAD: Riding on dry roads. DYN...
    1,652

    Maneuvering and riding off is intuitive with the Automated Shift Assistant (ASA), simplifying processes enormously and reducing the rider’s workload. In the neutral position "...
    1,221

    The Automated Shift Assistant (ASA) was initially available on the 2025 BMW R 1300 GS and the BMW R 1300 GS Adventure. For 2026 model year, ASA is available on the R 1300 R, R 1...
    20,086

    With Adaptive Ride Height: Ride height control Adaptive ride height control automatically adapts the ride height to suit the driving speed. After pullaway, the suspension change...
    16,955

    A Bluetooth connection with your smartphone is required for the telephone and media functions. This is how you set up the connection: Select the "Connectivity Hub" (links icon) ...
    16,771

    If the battery of the radio-operated key is empty or you do not have the radio-operated key available, you can start your R 1300 GS by placing the spare key in the ring antenna ...
    14,068

    You will find the operating instructions for the ConnectedRide Navigator here .
    11,271

    There are 2 ways to import a route: Import via the BMW Motorrad Connected app Start the route import in the BMW Motorrad Connected app. This saves the import in your BMW ID Clou...
    10,730

    The option riding modes Pro offers you additional riding modes for particularly demanding applications. You can even customize the DYNAMIC PRO and ENDURO PRO riding modes. DYNAM...
    8,306

    Yes. The BMW Motorrad Connected app offers the function of importing and following routes. To do this, select the "Trips" menu , "Route import" and the storage location with the...
    6,093

    Immediately after turning on the Navigator, a pop-up window is displayed on the home screen: "A new update is available". It is best to click directly on the pop-up to be redire...
    5,333

    As long as the vehicle is switched off, the state of charge or the voltage of the battery is checked once a day. If the system ascertains that the values measured in this way ar...
    5,292

    BMW Motorrad offers you preconfigured modes to suit the various purposes: Standard ECO: Range-optimised riding. RAIN: Riding on rain-wet roads. ROAD: Riding on dry roads....
    5,105

    With a BMW ID, all your data is stored in the cloud and all your devices are connected and synchronized via the Internet. For example, all data from your ConnectedRide Navigator...
    4,324

    Follow these instructions: Select the "Connectivity Hub" on the Navigator. Click on "Connect new device" and select either "Rider helmet" or "Passenger helmet". The Navigator sc...
    4,281

    Inside the Vario cases or inside the Vario topcase there is a servomotor that locks or opens the opening push-button on the outside.
    4,118

    Start charging procedure: Turn off standby mode. Turn the charging socket cover in the arrow direction and remove it. Remove the protective cap from the charging plug. Connect t...
    4,110

    In principle, the following settings should be ensured: Access to the smartphone location for BMW Motorrad Connected must be set to ALWAYS Energy optimization for BMW Motorrad C...
    3,937

    To attach the Vario cases to your motorcycle, proceed as follows: Unlock the round protective cap and remove it from the holder. Turn the key in the case lock to the "RELEASE"...
Loading
Automated Shift Assistant (ASA) | BMW Motorrad FAQ