Loading
Home
Article
2,614

How do I start or end the charging process on the CE 04?

To start the charging procedure: Turn off standby mode. The charging procedure will not start until standby mode has been turned off. If standby mode is turned back on during the charging procedure, the charging procedure will be interrupted. 

  1. Open the charging compartment.
  2. Remove the charging socket cover.
  3. Remove the protective cap from the charging plug.
  4. Connect the adapter cable to the domestic socket outlet or to the charging station, as applicable. If charging at a charging station, follow the instructions at the charging station.
  5. Connect the charging cable to the charging socket.
  6. If standby mode is turned on, a display message will appear. Check the charging current limit and adjust it, if necessary.
  7. Turn off standby mode.
  8. The charging process starts.

End charging procedure requirement: If you are charging your vehicle at a charging station, end the charging process at the charging station before detaching the charging cable.

  1. Turn on standby mode.
  2. The charging cable is unlocked at the electric scooter.
  3. Press the release button and detach the charging cable from the charging socket on the E-Scooter.
  4. Attach the charging socket cover.
  5. Unplug the standard charging cable from the domestic socket outlet or the charging station, as applicable.
  6. Place the protective cap on the charging plug.
  7. Stow the standard charging cable in the helmet compartment or, if the charging cable is firmly attached to the charging station, put it in the designated place.
Urban Mobility
Was this article helpful?

Recommended articles

    4,118

    Start charging procedure: Turn off standby mode. Turn the charging socket cover in the arrow direction and remove it. Remove the protective cap from the charging plug. Connect t...
    2,658

    If the battery of the radio-operated key is dead, you can start the vehicle by touching the cover between the storage compartment flap and charging compartment flap with the rad...
    2,619

    Removing the drive battery: Remove the seat Press the release button and disconnect connector from the drive battery Store connector 2 at the side. Open the hook and loop faste...
    2,599

    The maximum power is: 42 hp (31 kW), at RPM: 4900 min-1 The range is: 81 miles (130 km), in accordance with WMTC The maximum speed is: 75 mph (120 km/h)
    20,086

    With Adaptive Ride Height: Ride height control Adaptive ride height control automatically adapts the ride height to suit the driving speed. After pullaway, the suspension change...
    16,955

    A Bluetooth connection with your smartphone is required for the telephone and media functions. This is how you set up the connection: Select the "Connectivity Hub" (links icon) ...
    16,771

    If the battery of the radio-operated key is empty or you do not have the radio-operated key available, you can start your R 1300 GS by placing the spare key in the ring antenna ...
    14,068

    You will find the operating instructions for the ConnectedRide Navigator here .
    11,271

    There are 2 ways to import a route: Import via the BMW Motorrad Connected app Start the route import in the BMW Motorrad Connected app. This saves the import in your BMW ID Clou...
    10,730

    The option riding modes Pro offers you additional riding modes for particularly demanding applications. You can even customize the DYNAMIC PRO and ENDURO PRO riding modes. DYNAM...
    8,306

    Yes. The BMW Motorrad Connected app offers the function of importing and following routes. To do this, select the "Trips" menu , "Route import" and the storage location with the...
    6,093

    Immediately after turning on the Navigator, a pop-up window is displayed on the home screen: "A new update is available". It is best to click directly on the pop-up to be redire...
    5,333

    As long as the vehicle is switched off, the state of charge or the voltage of the battery is checked once a day. If the system ascertains that the values measured in this way ar...
    5,292

    BMW Motorrad offers you preconfigured modes to suit the various purposes: Standard ECO: Range-optimised riding. RAIN: Riding on rain-wet roads. ROAD: Riding on dry roads....
    5,105

    With a BMW ID, all your data is stored in the cloud and all your devices are connected and synchronized via the Internet. For example, all data from your ConnectedRide Navigator...
    4,324

    Follow these instructions: Select the "Connectivity Hub" on the Navigator. Click on "Connect new device" and select either "Rider helmet" or "Passenger helmet". The Navigator sc...
    4,281

    Inside the Vario cases or inside the Vario topcase there is a servomotor that locks or opens the opening push-button on the outside.
    4,110

    In principle, the following settings should be ensured: Access to the smartphone location for BMW Motorrad Connected must be set to ALWAYS Energy optimization for BMW Motorrad C...
    3,937

    To attach the Vario cases to your motorcycle, proceed as follows: Unlock the round protective cap and remove it from the holder. Turn the key in the case lock to the "RELEASE"...
    3,775

    The GPX file must have previously been stored on your iPhone locally or in iCloud Drive. To import the desired route as a GPX file into your BMW Motorrad Connected app, open the...
Loading
CE 04 | BMW FAQ