Loading
Home
Article
170

How do I turn on my ConnectedRide Com U1?

  1. Press the middle and (+) buttons simultaneously for one second.
  2. The LED lamp on the control unit flashes blue.
  3. You hear "Hello" over the speakers.
Communication
Was this article helpful?

Recommended articles

    1,159

    Make sure your ConnectedRide Com U1 works properly. Check if there is a software update and download the Device Manager from our homepage to your PC and follow the instructions...
    821

    There are 2 ways to change the language of your ConnectedRide Com U1: via the associated app "Com U1" via the Device Manager on your PC / laptop Please note: Always use the la...
    209

    Use the included mounting material and follow the installation instructions for mounting your ConnectedRide Com U1 on your helmet. If you follow the steps in the instructions, t...
    525

    You can connect your ConnectedRide Com U1 to another person via Bluetooth Intercom using the following communication systems: other ConnectedRide Com U1 communication systems ...
    335

    If your ConnectedRide Com U1 connection is poor, follow these steps: Check if all communication participants are within range. Make sure that all Bluetooth Intercom devices have...
    169

    Sharing music is only possible with other ConnectedRide Com U1 or Sena communication systems that support this function. In some cases, the audio quality may decrease a little. ...
    20,086

    With Adaptive Ride Height: Ride height control Adaptive ride height control automatically adapts the ride height to suit the driving speed. After pullaway, the suspension change...
    16,955

    A Bluetooth connection with your smartphone is required for the telephone and media functions. This is how you set up the connection: Select the "Connectivity Hub" (links icon) ...
    16,771

    If the battery of the radio-operated key is empty or you do not have the radio-operated key available, you can start your R 1300 GS by placing the spare key in the ring antenna ...
    14,068

    You will find the operating instructions for the ConnectedRide Navigator here .
    11,271

    There are 2 ways to import a route: Import via the BMW Motorrad Connected app Start the route import in the BMW Motorrad Connected app. This saves the import in your BMW ID Clou...
    10,730

    The option riding modes Pro offers you additional riding modes for particularly demanding applications. You can even customize the DYNAMIC PRO and ENDURO PRO riding modes. DYNAM...
    8,306

    Yes. The BMW Motorrad Connected app offers the function of importing and following routes. To do this, select the "Trips" menu , "Route import" and the storage location with the...
    6,093

    Immediately after turning on the Navigator, a pop-up window is displayed on the home screen: "A new update is available". It is best to click directly on the pop-up to be redire...
    5,333

    As long as the vehicle is switched off, the state of charge or the voltage of the battery is checked once a day. If the system ascertains that the values measured in this way ar...
    5,292

    BMW Motorrad offers you preconfigured modes to suit the various purposes: Standard ECO: Range-optimised riding. RAIN: Riding on rain-wet roads. ROAD: Riding on dry roads....
    5,105

    With a BMW ID, all your data is stored in the cloud and all your devices are connected and synchronized via the Internet. For example, all data from your ConnectedRide Navigator...
    4,324

    Follow these instructions: Select the "Connectivity Hub" on the Navigator. Click on "Connect new device" and select either "Rider helmet" or "Passenger helmet". The Navigator sc...
    4,281

    Inside the Vario cases or inside the Vario topcase there is a servomotor that locks or opens the opening push-button on the outside.
    4,118

    Start charging procedure: Turn off standby mode. Turn the charging socket cover in the arrow direction and remove it. Remove the protective cap from the charging plug. Connect t...
Loading
ConnectedRide Com U1 | BMW Motorrad FAQ